< back to products

A6003012 2.5:1 12.5VA VT Pack
This VT PackTM is for 480/277 4-wire wye applications where traditional 2.5:1 VTs are used. For all other 480V applications, we recommend other versions—see catalog for various options. This VT Pack consists of three revenue-accuracy toroidal voltage transformers for use with modern wide voltage range electronic watthour meters or older induction (disk-type) meters. The transformers are encased in epoxy inside a UV-resistant polycarbonate enclosure. This VT Pack can be used with either standard transformer-rated meters or the Form 9S, Class 200 solid state polyphase meter. The connector on the VT Pack mates with the wiring harness of our sockets or block assemblies. For existing transformer-rated applications, a color-coded wiring harness is available either with our standard color code or can be supplied in custom color-coding and lengths to meet your Company’s requirements. The VT Pack can be mounted in a pad mount transformer, transformer cabinet, on the outside of an existing meter socket, or other convenient location. The keyhole slot on the VT Pack makes mounting on any 1/4” mounting screw or shoulder rivet quick and easy. The VT Pack can also be mounted on a cross arm, pole or other suitable outdoor location when used with the optional Connector Cover.
Weight:	14 lbs
Collar Diameter:	2.2"
Accuracy:	+/- 0.15% @ 12.5VA @ .1 PF lag
Connector:	9 pin, 600 volt, UL
Enclosure:	Light gray, UV resistant polycarbonate
Insulation level:	10 kV BIL
Over voltage withstand:	600V for 1 minute.
Transformer type:	Toroidal autotransformer
Thermal Rating:	150 VA @ 30 ° C
Size:	12 3/16” long by 4” wide by 3 1/16” deep, including 1” deep collar