< back to products

A6004824 2:1 12.5 VA VT Pack
This fully ANSI compliant VT Pack™ with a ratio of 2:1 is designed to be used on 480/240 volt four wire delta, 480 volt three wire delta, or 480/277 volt four wire wye applications. This VT Pack consists of three revenue-accuracy voltage transformers that are encased in epoxy inside a UV-resistant polycarbonate enclosure. This VT Pack can be used with either induction (disk type), solid-state fixed voltage, wide voltage range solid-state, or a Form 9S, Class 200 solid state wide voltage range polyphase meter The connector on the VT Pack mates with a wiring harness, or the wiring harness in one of our sockets or block assemblies. For conventional transformer-rated applications, a color-coded wiring harness is available with either our standard 6 foot harness or custom wire color-coding and lengths to meet your Company’s requirements. With minimum order requirements, we can even print color names or other information on the conductors. The VT Pack can be mounted in a pad mount transformer, transformer cabinet, on the outside of an existing meter socket, or other convenient location. The keyhole slot on the VT Pack makes mounting on any 1/4” mounting screw or shoulder rivet quick and easy. The VT Pack can also be mounted on a cross arm, pole or other suitable outdoor location when used with the optional Connector Cover.
Collar Diameter:	2.2"
Accuracy:	+/- 0.3% @ 12.5VA @ .1 PF lag
Connector:	9 Pin, 600 volt, UL
Enclosure:	Light gray, UV resistant polycarbonate
Insulation level:	10 kV BIL
Thermal Rating:	150 VA @ 30 ° C
Transformer type:	Toroidal autotransformer
Weight:	14 lbs.
Size:	12 3/16” long by 4” wide by 3 1/16” deep, including 1” deep collar
Over voltage withstand:	960V for 1 minute