 |
Home •
Products •
Harnesses •
Why a VT Pack •
Which VT Pack? Reference • FAQs • About TSTM • Contact • VT Pack Warranty • Forums |
 |
| SRA60030125 VT Pack |
|
| This VT Pack™ is for 480/277 4-wire wye applications where traditional 2.4:1 VTs are used. For all other 480V applications, we recommend other versions—see catalog for various options. This VT Pack consists of three revenue-accuracy toroidal voltage transformers for use with modern wide voltage range electronic watthour meters or older induction (disk-type) meters. The transformers are encased in epoxy inside a UV-resistant polycarbonate enclosure. This VT Pack can be used with either standard transformer-rated meters or the Form 9S, Class 200 solid state polyphase meter. The VT Pack can be mounted in a pad mount transformer, transformer cabinet, on the outside of an existing meter socket, or other convenient location. The VT Pack can also be mounted on a cross arm, pole or other suitable outdoor location. The VT Pack comes with a 6' insulated finely stranded 8 wire control cable that allows for quick and efficient connection. | |
| Collar Diameter: | 2.2" |
| Enclosure: | Light gray, UV resistant polycarbonate |
| Insulation Level: | 10 kV BIL |
| Transformer type: | Toroidal autotransformer |
| Thermal Rating: | 150 VA @ 30 Degrees Celsius |
| Over voltage withstand: | 600V for 1 minute |
| Connector: | 6' Insulated 8 wire control cable |
| Weight: | 17 Pounds |
| Size: | 12 3/16" long by 4" wide by 3 3/8" deep |
| Accuracy: | +/- 0.3% @ 12.5 VA @ .1 PF Lag |
