 |
Home •
Products •
Harnesses •
Why a VT Pack •
Which VT Pack? Reference • FAQs • About TSTM • Contact • VT Pack Warranty • Forums |
 |
| 6003012 2.5:1 VT Pack |
|
| The VT Pack can be mounted in a pad mount transformer, transformer cabinet or other convenient location. The VT Pack can even be mounted externally on a pole, cross arm or other mounting bracket when used with the (Cat. # Connector Cover) UV resistant boot that protects the connector and wire. The VT Pack harness can be custom made to any length or color code to conform to your Companys requirements. The wiring harness, along with connector, reduces the needed connections and likelihood of wiring errors. The keyhole slot on the VT Pack makes mounting on any mounting screw or shoulder rivet quick and easy. | |
| Weight: | 12 lbs. |
| Accuracy: | +/- 0.3% @ 7.5VA @ .7 PF lag |
| Connector: | 9 pin, 600 volt, UL |
| Enclosure: | Light gray, UV resistant polycarbonate |
| Insulation level: | 10 kV BIL |
| Over voltage withstand: | 600V for 1 minute |
| Collar Diameter: | 2.2" |
| Transformer type: | Toroidal autotransformer |
| Thermal Rating: | 100 VA @ 30 ° C |
| Size: | 12 3/16” long by 4” wide by 3 1/16” deep, including 1” deep collar |
