PowerPack PP6004824

Compatibility Features

  • Ratio

    • 2:1 ratio 400 VA

This PowerPack™ is one of our specially designed toroidal autotransformers to provide power for a meter's wide voltage range power supply and any under-glass device, like power line carrier (PLC) technology, requiring connection to the power lines for purposes of communications. Since the meter's wide voltage range power supply as well as most PLC technologies can be powered at a voltage less than the service voltage, a 2:1 ratio is adequate for most applications. The transformer is encased in epoxy inside a flame retardant polycarbonate enclosure.

The PowerPack™, normally used with one or more AccuPack's™, mounts on a required TSTM Backplane very much like a single-phase residential circuit breaker. The Backplane can be mounted in a pad mount transformer, transformer cabinet, in one of our enclosures designed for that purpose, or other convenient location.

The PowerPack™ is not designed to be mounted outdoors.

Accepted Conductor Size #14 - #6 Cu
Accuracy N/A
Insulation Level 10 kV BIL
Rated Primary Voltage 480 volts
Thermal Rating 400 VA @ 55° C
Transformer Type Toroidal autotransformer
Over Voltage Withstand 600 volts for 1 minute
Enclosure Red, flame retardent, (VO) rating polycarbonate
Size 5.5 in. wide X 4.25 in. high X 3 in. deep
Weight 4.56 lbs.