VersaPack VPA60030125

Compatibility Features

  • Phase

    • 3-Phase 4-Wire Wye
  • Ratio

    • 2.4:1 ratio 12.5 VA

This VersaPack™ is one of three Precision Voltage Dividing Transformers (PVDTs) needed for 480/277 4-wire wye applications where traditional 2.4:1 VT's are used. For all other 480V applications, we recommend other versions; see our “Product” page for various options. This VersaPack™ consists of one revenue-accuracy toroidal autotransformer for use with modern wide voltage range electronic watthour meters or older induction (disk-type) meters. The transformer is encased in epoxy inside a flame retardant polycarbonate enclosure.  

The VersaPack™ mounts on a required TSTM Backplane very much like a single-phase residential circuit breaker. The Backplane, which can accept up to three VersaPack's™, can be mounted in a pad mount transformer, transformer cabinet, in one of our enclosures designed for that purpose ( refer to “Product” page, “Enclosure” tab, Long Narrow or Universal ), or other convenient location. . Many meter socket manufacturers offer “extended” sealed compartments to accommodate the VersaPack / Backplane isolating the 480 volts. The VersaPack™ is not designed to be mounted outdoors.

Example photo shown. Label will vary by model.

Accepted Conductor Size #14 - #6 Cu
Accuracy +/- 0.3% @ 12.5VA @ .1 PF lag
Rated Primary Voltage 277 volts
Insulation Level 10 kV BIL
Thermal Rating 300 VA @ 55° C
Transformer Type Toroidal autotransformer
Over Voltage Withstand 554 volts for 1 minute
Enclosure Blue/gray, flame retardant (V0 rating) polycarbonate
Size 5.5 in. wide X 4.25 in. high X 3 in. deep
Weight 4.56 lbs.
Module Case Color Blue

Related Products