- 3-Phase 3-Wire
- 3-Phase 4-Wire Delta
- 2:1 ratio 12.5 VA
VersaPack™ is part of the FlexPack System™ PVDT transformers from TSTM.
The associated models (ratio’s) are the same revenue-accuracy toroidal
autotransformer in the VT Packs™. The transformer is individually
encased in epoxy inside a flame retardant polycarbonate enclosure.
The VersaPack “System” is for use with modern wide voltage range solid state meters as well as older induction (disk-type) watthour meters where traditional VT’s are used. The VersaPack 2:1 ratio transformer is used in single phase, three phase 3-wire delta or three phase 4-wire delta applications based upon a 240V secondary. The number of transformers required are:
Single phase 2 or 3-wire, 480V is (1) or (2) based upon the meter Form 3S or 4S
Three phase 3-wire delta, 480V is (2) for meter Form 5S, 35S/45S
**Three phase 4-wire delta, 480/240V is (3) for meter Form 9S
The VersaPack™ mounts on a required TSTM Backplane very much like a single-phase residential circuit breaker. The Backplane, which can accept up to three VersaPacks™, can be mounted in a pad mount transformer, transformer cabinet, in one of our enclosures designed for that purpose ( refer to “Product” page, “Enclosure” tab, Long Narrow or Universal ), or other convenient location. . Many meter socket manufacturers offer “extended” sealed compartments to accommodate the VersaPack / Backplane isolating the 480 volts. The VersaPack™ is not designed to be mounted outdoors.
Example photo shown. Label will vary by model.
|Accepted Conductor Size||#14 - #6 Cu|
|Accuracy||+/- 0.3% @ 12.5VA @ .1 PF lag|
|Rated Primary Voltage||480 volts|
|Insulation Level||10 kV BIL|
|Thermal Rating||300 VA @ 55° C|
|Transformer Type||Toroidal autotransformer|
|Over Voltage Withstand||960 volts for 1 minute|
|Enclosure||Blue/gray, flame retardant (V0 rating) polycarbonate|
|Size||5.5 in. wide X 4.25 in. high X 3 in. deep|
|Module Case Color||Blue|