VT Pack™ A6004824
- 3-Phase 4-Wire Delta
- 2:1 ratio 12.5 VA
This fully ANSI compliant VT Pack™ with a ratio of 2:1 is designed to be used on 480/240-volt four wire delta applications. The “A” designation specifies 12.5 VA rating. This VT Pack consists of three revenue-accuracy voltage transformers that are encased in epoxy inside a UV-resistant polycarbonate enclosure.
This VT Pack can be used with either induction (disk type), solid-state fixed voltage, wide voltage range solid-state Form 9S meters. The connector on the VT Pack mates with a wiring harness, or the wiring harness in one of our sockets or block assemblies. For conventional transformer-rated applications, a color-coded wiring harness is available with either our standard 6-foot harness or custom wire color-coding and lengths to meet your Company's requirements.
The VT Pack can be mounted in a pad mount transformer, transformer cabinet, on the outside of an existing meter socket, in one of our enclosures designed for that purpose ( refer to “Product” page, “Enclosure” tab, Long Narrow or Universal ), or other convenient location. Many meter socket manufacturers offer “extended” sealed compartments to accommodate a VT Pack isolating the 480 volts. The keyhole slot on the VT Pack makes mounting on any 1/4" mounting screw or shoulder rivet quick and easy. The VT Pack can also be mounted on a cross arm, pole or other suitable outdoor location when used with the optional Connector Cover.
A REQUIRED harness is used for external mounting of the VT Pack™ in transformer-rated applications and is available in our standard 6-foot, 12-foot, or 20-foot lengths and color code.
The harness can also be customized to any length and color code to accommodate your company's requirements.
|9 Pin, 600 volt, UL
|+/- 0.3% @ 12.5VA @ .1 PF lag
|10 kV BIL
|150 VA @ 30 degrees C
|Over Voltage Withstand
|960V for 1 minute
|Light gray, UV resistant polycarbonate
|12 3/16" long by 4" wide by 3 1/16" deep, including 1" deep collar